Freezing Dryer
-
Water-Cooled High-Efficiency Air Cooler, Water-Cooled Cooler
Using advanced bimetallic finned tube as condensing tube in national aviation industry, the heat dissipation area is greatly increased under the same volume, the cooling efficiency is high, and the suitable industrial and mining scope is wide. It is an ideal cooling tool for Compressed air.
Main Technical Parameters
Capacity:1~500Nm3/min
Operationg pressure:0.2~1.0MPa(can provide1.0~3.0mpa)
Inlet air Temperature:≤180℃
Outlet air Temperature:≤42℃
Environment Temperature:≤32℃
Pressure Loss:≤0.02MPa -
Air-cooled Dryer, water-cooled Dryer, Dryer
According to the principle of freezing and dehumidifying, the Compressed air heat is exchanged through the evaporator, so that the gaseous water of the Compressed air condenses into liquid water and is discharged from the machine through the air-water separator.
Main Technical Parameters
Capacity:1~500Nm3/min
Operationg pressure:0.6~1.0MPa（can provide1.0~3.0mpa）
Inlet air Temperature:Normal temperature≤45℃;High temperature≤80℃
Cooling method:Air-cooled;Water-cooled
Dew point:≤-23℃(Normal pressure dew point)
Environment Temperature:≤42℃
Pressure Loss:≤0.02MPa
Installation method: indoor installation -
Air Cooler, air-cooled high-efficiency Air Cooler, water-cooled high-efficiency Air Cooler
The air cooled high efficiency air cooler is placed behind the compressor to cool the high temperature gas produced by the compressor below 45 °C, remove the large amount of water in the Compressed air, and discharge the machine to meet the operating conditions of the rear equipment. The series of products adapt to a wide temperature range, small size, easy installation, low operating costs, long service life, especially suitable for the use of non-water, water shortage and mobile users.
Main Technical Parameters
Capacity:1~500Nm3/min
Operationg pressure:0.2~1.0MPa
Inlet air Temperature:≤160℃
Outlet air Temperature:≤45℃
Environment Temperature:≤35℃
Pressure Loss:≤0.02MPa
